3-Wire Voltage Mode Bipolar Latch Hall Effect Switch Sensor JYM27122
Product Description of Bipolar Latch Hall Effect Switch Sensor JYM27122
The JYM27122 series is a high-sensitivity bipolar latch Hall effect switch chip designed using BCDMOS process technology. The chip integrates on-chip voltage regulation, under-voltage lockout, signal amplification, temperature compensation, offset compensation, comparators, output driver, and output current limiting circuits. In addition, mechanical stress has minimal impact on the chip's magnetic parameters, featuring strong electromagnetic interference (EMI) immunity and high reliability.
The JYM27122 sensor chip is suitable for industrial environments with an operating junction temperature range of -40℃ to 150℃ and a supply voltage range of 2.8V to 24V. It is available in TO-92S and SOT23-3L packages, which comply with RoHS standards.
Product Features of Bipolar Latch Hall Effect Switch Sensor JYM27122
● 0.18μm BCDMOS Technology
● Operating Voltage Range: 2.8V to 24V
● Typical Operating Current: 1.8mA
● Magnetic Sensitivity BOP=30Gs, BRP=-30Gs
● ESD: ±8kV
● Operating Junction Temperature Range: -40℃ to 150℃
● Over-Temperature Protection
● Reverse Polarity Protection Between VCC and GND
● Output Current Limiting Protection
● Magnetic Switching Points Insensitive to Supply Voltage Variation
● Temperature Compensated Magnetic Switch Points
● TO-92S and SOT23-3L Package Options
● RoHS Compliant: (EU) 2015/863
Applications of Bipolar Latch Hall Effect Switch Sensor JYM27122
● Solid-State Switches
● Commutation Control for 3-Phase BLDC Motors
● Power Tools
● Flow Sensors
● Tachometers
● Speed and Proximity Detection
● Linear and Angular Position Detection
Ordering Information of Bipolar Latch Hall Effect Switch Sensor JYM27122
Package
| Temperature Range
| Ordering Part Number
| Packaging & Shipping
| Product Code
|
TO-92S
| -40℃～150℃ | JYM27122UA
| Tape and Reel
1000 units | UA |
SOT23-3L
| -40℃～150℃ | JYM27122SO
| Tape and Reel
3000 units | SO
|
Marking Example of Bipolar Latch Hall Effect Switch Sensor JYM27122:
Functional Block Diagram of Bipolar Latch Hall Effect Switch Sensor JYM27122
Typical Application Circuits of Bipolar Latch Hall Effect Switch Sensor JYM27122
Typical Application Circuit 1: As shown in Figure 1, recommended value for RL is 1kΩ to 10kΩ, CP=10nF, CL=4.7nF.
Typical Application Circuit 2: As shown in Figure 2, for noisy supply applications, a series resistor R1 is recommended at the supply input, a decoupling capacitor CP between VCC and GND, and a capacitor CL between output and GND, placed close to the chip. (Recommended: R1=100Ω, CP=10nF, CL=4.7nF)
